Husqvarna FS7000D Parts Manual

The Husqvarna FS7000D is a professional-grade floor saw designed for heavy-duty concrete cutting applications. This parts manual provides detailed information on the components, assembly, maintenance, and replacement parts for the FS7000D model. Below are key sections covering identification, major assemblies, engine components, cutting system, hydraulic system, electrical system, and ordering information.

1. Identification & Serial Numbers 2. Major Assemblies Overview 3. Engine Components 4. Cutting System & Blade Assembly 5. Hydraulic System Parts 6. Electrical System Parts 7. Frame & Chassis Components 8. Wheels & Mobility Parts 9. Control Panel & Operator Parts 10. Maintenance & Service Intervals 11. Parts Ordering & Exploded Views

Identification & Serial Numbers

Locate the model plate and serial number for accurate parts identification.

Item	Location	Description
Model Plate	Right side of main frame	Shows model FS7000D, engine specs, and manufacturing info
Serial Number	Stamped on frame near front axle	Unique identifier for parts lookup (e.g., 123456789)
Engine Serial	On engine block, near cylinder head	For engine-specific parts ordering
Hydraulic Pump ID	On pump housing	Required for hydraulic component orders

Major Assemblies Overview

Key assemblies of the Husqvarna FS7000D floor saw.

Engine Assembly: Includes engine, mounting brackets, and drive components.
Cutting Head Assembly: Blade, spindle, guard, and depth adjustment mechanism.
Hydraulic System: Pump, hoses, valves, and reservoir.
Frame & Chassis: Main frame, handles, and protective covers.
Electrical System: Wiring harness, switches, and ignition components.
Mobility System: Wheels, axles, and steering components.

WARNING! Always disconnect spark plug and relieve hydraulic pressure before disassembling any major component.

Engine Components

The FS7000D is equipped with a heavy-duty gasoline engine.

Engine Model: Honda GX690 or equivalent.
Cylinder Head: Includes valves, springs, and rocker arms.
Piston & Rings: Standard and oversize kits available.
Crankshaft & Bearings: Main and connecting rod bearings.
Carburetor Assembly: Complete carburetor and linkage parts.
Ignition System: Spark plugs, ignition coil, and flywheel.
Air Filter: Dual-stage filter element and housing.
Fuel System: Fuel pump, lines, and tank components.
Exhaust System: Muffler, manifold, and heat shields.

Cutting System & Blade Assembly

Components related to the cutting function.

Part Number	Description	Qty
501 88 02-01	Blade Spindle Assembly	1
501 88 02-02	Spindle Bearings (Set)	2
501 88 02-03	Blade Flange & Nut	1
501 88 02-04	Blade Guard Assembly	1
501 88 02-05	Depth Adjustment Gear	1
501 88 02-06	Depth Scale & Indicator	1
501 88 02-07	Blade Guide Rollers	4

Note: Always use Husqvarna-approved diamond blades for optimal performance and safety.

Hydraulic System Parts

Hydraulic components for blade drive and auxiliary functions.

Hydraulic Pump: Main pump assembly with mounting hardware.
Hydraulic Motor: Blade drive motor and mounting bracket.
Control Valves: Directional and pressure control valves.
Hydraulic Hoses: High-pressure hoses with fittings.
Oil Reservoir: Tank, cap, and filter.
Cooler: Hydraulic oil cooler and lines.

CAUTION! Use correct hydraulic fluid and bleed system after service to prevent damage.

Electrical System Parts

Electrical components and wiring.

Ignition Switch: Key switch with positions.
Wiring Harness: Main harness with connectors.
Start Solenoid: For electric start models.
Battery: 12V battery and cables.
Safety Switches: Blade guard and throttle interlock switches.
Indicator Lights: Oil pressure and temperature lights.

Frame & Chassis Components

Structural parts and covers.

Part Number	Description	Notes
501 88 08-01	Main Frame Assembly	Welded structure
501 88 08-02	Engine Mounting Brackets	Left and right
501 88 08-03	Side Covers	Plastic, both sides
501 88 08-04	Front Bumper	Rubber impact strip
501 88 08-05	Handle Mounting Brackets	For control handles

Wheels & Mobility Parts

Components for moving and positioning the saw.

Front Wheels: 10-inch pneumatic wheels with bearings.
Rear Wheel: 8-inch solid rubber wheel.
Axles & Spindles: Front and rear axle assemblies.
Steering Linkage: Tie rods and steering arm.
Wheel Locks: Manual locking pins for stationary use.

Tip: Check tire pressure and wheel bearing lubrication regularly.

Control Panel & Operator Parts

Operator interface components.

Throttle Control: Lever and cable assembly.
Blade Lift Handle: For depth adjustment.
Steering Handles: Left and right handle grips.
Control Labels: Decals for controls and warnings.
Operator Manual Holder: Bracket for storing manual.

Maintenance & Service Intervals

Recommended maintenance parts and intervals.

Service	Interval	Parts Required
Engine Oil Change	Every 100 hours	Oil filter, gasket, oil
Air Filter Service	Every 50 hours	Filter element
Hydraulic Filter	Every 300 hours	Hydraulic filter
Spark Plug	Every 200 hours	Spark plug
Blade Guide Rollers	Inspect weekly	Roller set
Wheel Bearings	Every 500 hours	Bearing kit

WARNING! Follow all safety procedures in the operator's manual during maintenance.

Parts Ordering & Exploded Views

How to order parts and use exploded diagrams.

Always provide model number (FS7000D) and serial number.
Reference the exploded view diagrams for part relationships.
Use the part numbers listed in this manual when ordering.
Contact authorized Husqvarna dealers for genuine parts.

Support: For technical support and parts ordering, contact Husqvarna at 1-800-487-5962 or visit www.husqvarna.com/us.

Exploded Views: Refer to separate diagrams for each assembly showing all components and part numbers.