Husqvarna Motorcycles Owners Manuals

Husqvarna Motorcycles, with a heritage dating back to 1903, produces high-performance off-road and street motorcycles known for Swedish engineering, premium components, and race-winning capabilities. This manual provides essential information for owners on safety, operation, maintenance, specifications, and troubleshooting for various Husqvarna models. Below are key sections covering important aspects of motorcycle ownership and care.

1. Models Overview 2. Safety Information 3. Controls and Instruments 4. Operation Guidelines 5. Maintenance Schedule 6. Technical Specifications 7. Basic Troubleshooting 8. Warranty Information 9. Accessories & Parts 10. Riding Tips 11. Contact & Support

Models Overview

Husqvarna offers a range of motorcycles across different categories: Motocross (FC, TC), Enduro (FE, TE), Dual Sport (FE, 701), and Street (Svartpilen, Vitpilen).

Model SeriesCategoryEngine Type
FC 250/350/450Motocross4-stroke, single cylinder
TC 125/250Motocross2-stroke, single cylinder
FE 250/350/450/501Enduro4-stroke, single cylinder
TE 150/250/300Enduro2-stroke, single cylinder
701 Enduro/SupermotoDual Sport693cc single cylinder
Svartpilen 401/701Street373cc/693cc single cylinder
Vitpilen 401/701Street373cc/693cc single cylinder

Safety Information

Always prioritize safety when operating your Husqvarna motorcycle.

  1. Wear appropriate protective gear: DOT/ECE certified helmet, gloves, boots, jacket, and pants.
  2. Pre-ride inspection: Check tires, brakes, lights, chain, and fluid levels before each ride.
  3. Ride within your limits: Adjust speed to conditions and your skill level.
  4. Follow local traffic laws and off-road regulations.

WARNING! Motorcycles are inherently risky; improper use can lead to serious injury or death. Never operate under the influence of alcohol or drugs.

Controls and Instruments

Familiarize yourself with the motorcycle's controls for safe operation.

  1. Handlebar controls: Right side - front brake lever, engine start/stop switch, throttle. Left side - clutch lever, light controls, horn, turn signals.
  2. Instrument cluster: Speedometer, tachometer (if equipped), odometer, trip meters, fuel gauge, warning lights (oil, engine, ABS).
  3. Foot controls: Right side - rear brake pedal, shift lever (1 down, 5 up pattern). Left side - kickstand.
  4. Key functions: Ignition, steering lock, fuel cap (varies by model).

CAUTION! Ensure you understand all controls before riding. Refer to your specific model's manual for details.

Operation Guidelines

Maintenance Schedule

Regular maintenance ensures optimal performance and longevity. Below are general intervals; consult your specific manual.

Daily/Pre-ride: Check tire pressure, brake function, chain tension/lubrication, fluid levels, lights.

After First 3 Hours: Change engine oil and filter (break-in service).

Every 15 Hours: Change engine oil, check valve clearance (4-stroke), clean air filter, inspect spark plug.

Every 30 Hours: Change oil filter, check wheel bearings, suspension linkage, brake pads.

Every 60 Hours: Change coolant, brake fluid, inspect clutch plates, check throttle cable free play.

Annually: Full inspection by authorized Husqvarna dealer.

Technical Specifications

Basic Troubleshooting

SymptomPossible CauseCorrective Action
Engine won't startDead battery, fuel issue, kill switchCheck battery charge; ensure fuel valve on; verify kill switch is in run position.
Poor performanceDirty air filter, old spark plugClean/replace air filter; install new spark plug.
Hard shiftingIncorrect oil, clutch adjustmentUse recommended oil; adjust clutch cable free play.
OverheatingLow coolant, clogged radiatorCheck coolant level; clean radiator fins of debris.
Brakes feel softAir in lines, worn padsBleed brake system; inspect and replace pads if needed.
Electrical issuesBlown fuse, loose connectionCheck fuses; inspect wiring connections.

Note: For complex issues, consult an authorized Husqvarna dealer.

Warranty Information

Husqvarna Motorcycles typically offer a limited warranty for a specified period (e.g., 24 months for street models, 6 months for competition models under certain conditions). Warranty covers defects in materials and workmanship when used under normal conditions and properly maintained. Always have services performed by authorized dealers and keep records. Warranty does not cover normal wear items (tires, chains, brake pads), damage from accidents, modifications, or improper use.

Accessories & Parts

Genuine Husqvarna accessories are designed to enhance your motorcycle's functionality and appearance while maintaining quality and safety standards.

  1. Performance: Akrapovič exhaust systems, engine tuning kits.
  2. Protection: Skid plates, handguards, frame guards.
  3. Comfort: Seat concepts seats, taller/shorter seats.
  4. Carrying: Luggage racks, soft/hard luggage options.
  5. Appearance: Graphics kits, anodized parts.

Tip: Using non-genuine parts may affect performance and void warranty. Purchase from authorized dealers.

Riding Tips

Improve your skills and enjoyment with these tips.

  1. Body Position: Stand on footpegs for off-road; keep weight centered and forward during acceleration, back during braking.
  2. Cornering: Look through the turn, lean bike more than body on street; use outside footpeg pressure off-road.
  3. Obstacles: Approach logs/rocks at a perpendicular angle; use throttle and clutch control.
  4. Hill Climbing: Momentum is key; shift weight forward; if you stall, use both brakes to control descent.
  5. Group Riding: Maintain safe distances; use hand signals; know the route and regrouping points.

CAUTION! Always ride within your ability. Consider taking a riding course from a certified instructor.

Contact & Support

For technical support, parts, or dealer locations:

Emergency: In case of accident or breakdown, ensure your safety first, then contact roadside assistance if available.

Husqvarna Motorcycles Owners Manuals © - All Rights Reserved 2025