Husqvarna Mowers YTH22V42 Owner Manual

The Husqvarna YTH22V42 is a 22 HP V-Twin riding lawn tractor with a 42-inch cutting deck, hydrostatic transmission, electric PTO engagement, and a comfortable high-back seat. Designed for residential lawn care, it features easy operation, durable construction, and multiple cutting height adjustments. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: 22 HP Briggs & Stratton V-Twin engine, 42-inch stamped steel cutting deck, Hydrostatic transmission, Electric PTO clutch, High-back seat, Headlights, Cup holder, Hour meter.

Assembly & Setup

Unpack and inspect all parts. Assembly requires basic tools.

1. Install steering wheel: Align and tighten bolt.
2. Attach seat: Mount using provided bolts and washers.
3. Install battery: Connect red (+) then black (-) terminals.
4. Add engine oil: Use SAE 30 or 10W-30, check dipstick.
5. Fill fuel tank: Use fresh unleaded gasoline (87 octane minimum).
6. Check tire pressure: Inflate to 14 PSI (front) and 10 PSI (rear).

WARNING! Always disconnect spark plug wire before performing any assembly or maintenance.

Controls & Operation

Familiarize yourself with all controls before starting.

1. Ignition switch: Turn key to start; positions OFF, ON, START.
2. Brake pedal: Press to stop; must be engaged to start.
3. Drive pedal: Forward/reverse speed control.
4. PTO switch: Engages/disengages cutting blades.
5. Height adjustment lever: Sets cutting height (1.5-4 inches).
6. Choke control: Use for cold starts.
7. Throttle control: Sets engine speed (fast/slow).

CAUTION! Keep hands and feet away from moving parts. Do not operate on slopes greater than 15 degrees.

Specifications

• Model: YTH22V42
• Engine: 22 HP Briggs & Stratton V-Twin
• Cutting Deck: 42-inch stamped steel
• Transmission: Hydrostatic, infinite speeds 0-5.5 mph
• Fuel Type: Unleaded gasoline (87 octane minimum)
• Oil Capacity: 2 quarts (SAE 30 or 10W-30)
• Cutting Heights: 1.5, 2, 2.5, 3, 3.5, 4 inches
• Turning Radius: 18 inches
• Weight: 498 lbs
• Warranty: 2-year limited residential

Maintenance Schedule

Regular maintenance ensures long life and safe operation.

Note: Always refer to engine manual for specific engine maintenance.

Cutting Deck Operation

Proper deck operation ensures quality cut and long deck life.

1. Engage PTO only at full throttle.
2. Adjust cutting height before starting mower.
3. Mow at steady pace; avoid overlapping more than 2 inches.
4. Disengage PTO when crossing drives or gravel.
5. Clean deck after each use to prevent grass buildup.
6. Check belt tension every 25 hours.

WARNING! Always disengage PTO and turn off engine before performing any deck maintenance.

Engine Care

Proper engine maintenance is critical for performance.

1. Oil changes: Every 25 hours or seasonally (whichever comes first).
2. Air filter: Clean every 25 hours; replace every 50 hours.
3. Spark plug: Check gap (0.030 inches); replace annually.
4. Fuel: Use fresh unleaded gasoline; add fuel stabilizer for storage.
5. Cooling fins: Keep clean for proper engine cooling.

CAUTION! Engine is hot during and after operation. Allow to cool before servicing.

Storage & Winterization

Proper storage prevents damage during off-season.

1. Clean entire mower thoroughly.
2. Change engine oil and filter.
3. Add fuel stabilizer to tank and run engine for 5 minutes.
4. Disconnect battery and store in cool, dry place.
5. Store in dry, covered location.
6. Block up deck to relieve tire pressure.

Tip: Consider professional servicing before long-term storage.

Safety Information

Read and understand all safety instructions before operation.

• Never carry passengers.
• Keep children and pets away from mowing area.
• Wear appropriate clothing: long pants, sturdy shoes, eye protection.
• Clear mowing area of debris before mowing.
• Do not mow on wet grass or steep slopes.
• Always look behind when backing up.
• Use extra care when mowing near drop-offs or ditches.

DANGER! Rotating blades can cause serious injury or death. Always disengage PTO before leaving operator position.

Warranty & Support

Husqvarna YTH22V42 comes with 2-year limited residential warranty. Warranty covers defects in materials and workmanship. Normal wear items (belts, blades, tires) not covered. For warranty service, contact authorized Husqvarna dealer with proof of purchase. For support, visit www.husqvarna.com or call 1-800-487-5962.

Troubleshooting

Service: For repairs beyond basic maintenance, contact authorized Husqvarna dealer.

Support: 1-800-487-5962; www.husqvarna.com