Husqvarna TS 142K Manual

The Husqvarna TS 142K is a 42-inch riding lawn mower featuring a powerful engine, hydrostatic transmission, electric start, cutting height adjustment, and a durable steel cutting deck. Designed for residential lawn care, it offers comfort, reliability, and efficient performance. Below are key sections for safety, features, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. Controls & Operation 4. Specifications 5. Maintenance Schedule 6. Cutting Deck Adjustment 7. Storage & Winterization 8. Safety Guidelines 9. Warranty Information 10. Troubleshooting

Features at a Glance

Key components: 42-inch steel cutting deck, Hydrostatic transmission, Electric start with key, Comfortable high-back seat, Adjustable cutting height, and Dual-lever steering.

Feature	Description
Engine	Powerful gasoline engine for reliable performance
Transmission	Hydrostatic drive for smooth speed control
Cutting Deck	42-inch steel deck with mulching capability
Starting System	Electric key start with backup recoil
Seat	Padded high-back seat for operator comfort
Cutting Height	Adjustable via lever (1.5 to 4 inches)
Fuel Tank	Large capacity for extended operation
Steering	Dual-lever control for precise maneuvering
Blades	Dual blades for even cutting
Wheels	Large rear tires for traction and stability

Assembly & Setup

Unpack and inspect all parts. Assembly requires basic tools.

Attach steering wheel: Align and tighten with provided hardware.
Install seat: Mount onto frame and secure with bolts.
Connect battery: Attach cables to battery terminals (red to positive, black to negative).
Add engine oil and fuel: Use recommended oil type and fresh gasoline.
Check tire pressure: Inflate to recommended PSI (see specifications).

WARNING! Always disconnect spark plug wire during assembly to prevent accidental starting.

Controls & Operation

Familiarize yourself with controls before operation.

Starting: Insert key, set parking brake, move PTO to off, turn key to start.
Driving: Release parking brake, use forward/reverse pedals for speed control.
Cutting: Engage PTO lever to activate blades; adjust speed based on grass conditions.
Stopping: Disengage PTO, set parking brake, turn key to off, remove key.

CAUTION! Always operate on level ground; avoid slopes greater than 15 degrees.

Specifications

Engine: XX hp gasoline engine (model specific).
Cutting Width: 42 inches.
Transmission: Hydrostatic drive.
Fuel Capacity: XX gallons.
Cutting Height Range: 1.5 to 4 inches.
Wheel Size: Front: XX inches, Rear: XX inches.
Weight: Approx. XXX lbs.
Starting: Electric key start with recoil backup.
Deck Material: Reinforced steel.
Warranty: Limited residential warranty (see details).

Maintenance Schedule

Regular maintenance ensures longevity and performance.

After first 5 hours: Change engine oil, check all bolts and fittings.

Every 25 hours: Check air filter, inspect blades, lubricate moving parts.

Every 50 hours: Change oil, replace spark plug, check tire pressure.

Every 100 hours: Replace air filter, check drive belt tension, inspect battery.

Seasonally: Sharpen/replace blades, clean underside of deck, check transmission fluid.

Cutting Deck Adjustment

Proper adjustment ensures even cutting.

Park on level surface and disengage PTO.
Set cutting height lever to desired position.
Measure blade height from ground on all sides; adjust deck leveling bolts if uneven.
Check belt tension; adjust idler pulley if necessary.

Tip: Always disconnect spark plug before adjusting deck or blades.

Storage & Winterization

Prepare mower for off-season storage.

Clean thoroughly: Remove grass clippings from deck and engine.
Fuel system: Add fuel stabilizer or drain tank and run engine until dry.
Battery: Disconnect and store in cool, dry place; charge periodically.
Engine: Change oil, remove spark plug and add oil to cylinder, then reinstall plug.
Store in dry, covered area; elevate if possible to prevent flat spots on tires.

WARNING! Never store with fuel in tank without stabilizer; fuel degradation can damage engine.

Safety Guidelines

Always follow safety precautions to prevent injury.

Read manual thoroughly before operation.
Wear appropriate clothing: sturdy shoes, eye protection, hearing protection.
Clear mowing area of debris, rocks, and toys.
Never carry passengers; keep bystanders away.
Disengage blades when not cutting; turn off engine before leaving operator position.
Use caution on slopes; mow up and down, not across.
Never remove safety devices or guards.

Warranty Information

Husqvarna provides a limited warranty for residential use. Warranty covers defects in materials and workmanship for specified periods: 2 years for the mower, XX years for the engine (see engine manufacturer's warranty). Proof of purchase required. Does not cover normal wear, misuse, or lack of maintenance. For warranty service, contact an authorized Husqvarna dealer.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Engine won't start	Dead battery, empty fuel, faulty spark plug	Charge/replace battery; add fuel; check/replace spark plug.
Uneven cutting	Dull blades, uneven deck	Sharpen/replace blades; level cutting deck.
Loss of power	Clogged air filter, old fuel	Clean/replace air filter; drain and add fresh fuel.
Vibration	Loose blade, damaged spindle	Tighten blade bolts; inspect spindle for damage.
Hydrostatic transmission issues	Low fluid, drive belt loose	Check fluid level; adjust/replace drive belt.

Service: For technical support, contact Husqvarna at 1-800-487-5962 or visit www.husqvarna.com.