Owners Manual for Husqvarna Lawn Mower

The Husqvarna Lawn Mower is a reliable and efficient outdoor power tool designed for residential lawn care. It features a powerful engine, adjustable cutting heights, durable steel deck, ergonomic handles, easy-start system, mulching capability, and rear bagging system. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly Instructions 3. First-Time Operation 4. Specifications 5. Controls and Settings 6. Cutting Height Adjustment 7. Maintenance Schedule 8. Storage Guidelines 10. Safety Information 11. Warranty & Support 12. Troubleshooting

Features at a Glance

Key components: Engine, cutting deck, wheels, handle assembly, grass collection bag, and control levers.

Feature	Description
Engine	Powerful 4-stroke gasoline engine for reliable performance
Cutting Deck	Durable steel construction with multiple cutting height settings
Wheels	Large rear wheels for easy maneuverability on uneven terrain
Handle Assembly	Adjustable height with ergonomic grips for user comfort
Grass Collection Bag	Rear-mounted bag with easy-empty feature
Control Levers	Safety blade control and drive control for operation
Mulching Capability	Converts clippings into fine mulch for lawn nutrition
Easy-Start System	Simplified starting mechanism for quick operation
Cutting Width	Wide cutting path for efficient mowing
Fuel Tank	Generous capacity for extended mowing sessions

Assembly Instructions

Unpack and inspect all parts. Assemble on a flat, stable surface.

Attach handle: Secure handle to deck using provided bolts and wrench.
Install wheels: Insert axles through wheel hubs and secure with clips.
Mount grass bag: Attach bag holder to rear deck and hook collection bag.
Connect control cables: Route cables through handles and connect to engine.
Add oil and fuel: Fill engine with recommended oil and gasoline.

WARNING! Wear protective gloves during assembly. Ensure all bolts are tightened securely.

First-Time Operation

Before starting, perform pre-operation checks.

Check oil level: Ensure engine oil is at proper level.
Add fuel: Use fresh unleaded gasoline with appropriate octane rating.
Adjust cutting height: Set lever to desired height position.
Start engine: Set choke, pull starter cord firmly.
Engage blade: Press safety lever and blade control simultaneously.
Begin mowing: Walk at steady pace, overlapping cutting rows slightly.

CAUTION! Clear mowing area of debris. Never operate without proper safety gear.

Specifications

Engine Type: 4-stroke gasoline engine
Engine Power: 160cc displacement
Cutting Width: 22 inches
Cutting Heights: 6 positions (1.5-4 inches)
Deck Material: Reinforced steel
Wheel Size: 8-inch rear, 7-inch front
Fuel Capacity: 1.1 gallons
Oil Capacity: 20 oz
Weight: 75 lbs (assembled)
Warranty: 2-year limited warranty

Controls and Settings

Primary controls located on handle assembly.

Handle Controls: Drive control lever, blade control lever, height adjustment lever, throttle control.

Operation: Pull drive control to engage self-propulsion. Press blade control to rotate cutting blade. Adjust height lever for cutting preference. Use throttle for engine speed control.

Safety Features: Blade brake clutch stops blade within 3 seconds when released. Deadman switch requires operator presence. Engine kill switch for emergency shutdown.

Cutting Height Adjustment

Adjust cutting height to match grass conditions and season.

Stop engine and wait for blade to stop completely.
Locate height adjustment lever near each wheel.
Move lever to desired position (1=lowest, 6=highest).
Ensure all four levers are set to same position.
Test height by pushing mower on flat surface.

Tip: Cut higher in summer heat to reduce grass stress. Cut lower in spring/fall for denser growth.

Maintenance Schedule

Regular maintenance ensures optimal performance and longevity.

Interval	Maintenance Task
Before each use	Check oil level, inspect blade, clear deck of debris
Every 25 hours	Change engine oil, clean air filter, check spark plug
Every 50 hours	Replace air filter, sharpen/replace blade, check cables
Every 100 hours	Change fuel filter, check wheel bearings, inspect deck
Season end	Drain fuel, clean thoroughly, lubricate moving parts

WARNING! Always disconnect spark plug before performing maintenance.

Storage Guidelines

Proper storage prevents damage and extends mower life.

Clean thoroughly: Remove all grass clippings and debris.
Drain fuel: Run engine until tank is empty or use fuel stabilizer.
Change oil: Fresh oil prevents corrosion during storage.
Remove battery: If equipped, store battery in cool, dry place.
Cover mower: Use breathable cover in dry, protected area.
Elevate wheels: Place on blocks to prevent flat spots on tires.

CAUTION! Store in well-ventilated area away from open flames.

Safety Information

Always follow safety guidelines to prevent injury.

Wear protective equipment: Safety glasses, hearing protection, sturdy shoes
Clear mowing area: Remove stones, sticks, and debris before mowing
Never mow wet grass: Increased slipping hazard and poor cutting results
Keep children and pets away: Maintain 50-foot safety zone during operation
Use both hands: Always maintain firm grip on handle controls
Disconnect spark plug: Before any maintenance or blade inspection
Refuel safely: Allow engine to cool completely before adding fuel

DANGER! Never reach under deck while engine is running. Keep hands and feet away from rotating parts.

Warranty & Support

Husqvarna provides 2-year limited warranty for residential use. Warranty covers defects in materials and workmanship. Not covered: Normal wear, improper maintenance, commercial use, accidental damage. For support, visit www.husqvarna.com or contact 1-800-487-5962. Keep purchase receipt for warranty validation.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Engine won't start	Empty fuel tank, old gasoline, clogged air filter	Add fresh fuel, clean/replace air filter, check spark plug
Poor cutting performance	Dull blade, low engine speed, wet grass	Sharpen/replace blade, adjust throttle, wait for dry conditions
Uneven cutting pattern	Uneven tire pressure, bent blade, deck clogged	Inflate tires evenly, replace blade, clean underside of deck
Excessive vibration	Loose blade, damaged blade, unbalanced blade	Tighten blade bolt, replace damaged blade, balance blade
Self-propel not working	Drive cable loose, worn drive belt, control issue	Adjust drive cable, replace drive belt, check control lever
Grass not discharging	Clogged deck, wet grass, improper cutting height	Clean deck thoroughly, mow when dry, adjust cutting height

Service: For complex repairs, contact authorized Husqvarna service center.

Parts: Use only genuine Husqvarna replacement parts for optimal performance.