owners manual for husqvarna yta24v48 mower

The Husqvarna YTA24V48 is a 24-horsepower, 48-inch cutting deck riding lawn mower featuring a V-twin engine, hydrostatic transmission, electric PTO engagement, cruise control, adjustable cutting height, ergonomic high-back seat, cup holder, headlights, and a durable steel frame. It includes a mulching kit, bagging system, and tow hitch capability. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Operation 4. Specifications 5. Controls and Settings 6. Attachments & Accessories 7. Mowing Operation 8. Safety Features 10. Care & Maintenance 11. Regulatory Information 12. Troubleshooting

Features at a Glance

Key components: 24 HP Briggs & Stratton V-twin engine, 48-inch fabricated steel cutting deck, Hydrostatic transmission, Electric PTO, Cruise control, Adjustable seat, Headlights, Cup holder, Tow hitch.

Feature	Description
Engine	24 HP Briggs & Stratton V-twin, overhead valve
Cutting Deck	48-inch fabricated steel, 3-blade system
Transmission	Hydrostatic, infinite speed control
PTO Engagement	Electric switch for blade engagement
Cruise Control	Maintains constant speed without holding lever
Cutting Height	Adjustable from 1.5 to 4.5 inches
Seat	Ergonomic high-back, adjustable
Headlights	Integrated for low-light operation
Fuel Capacity	3.5 gallons
Battery	12V, maintenance-free

Assembly & Setup

Unpack and inspect all parts. Assemble on level ground.

Install steering wheel: Align and tighten with provided hardware.
Attach seat: Mount using bolts and washers.
Connect battery: Attach red (+) then black (-) terminals.
Install cutting deck: Align with mounting points and secure with pins.
Add engine oil and fuel: Use SAE 30 oil (check dipstick) and unleaded gasoline.

WARNING! Mower is heavy; use assistance. Ensure all bolts are tightened securely.

First-Time Operation

Perform pre-operation checks before starting.

Check oil level: Ensure between marks on dipstick.
Fuel: Fill with fresh unleaded gasoline.
Tire pressure: Inflate to 14 PSI (front) and 10 PSI (rear).
Blade engagement: Ensure PTO switch is off.
Start engine: Sit on seat, set parking brake, turn key to start.
Test controls: Practice forward/reverse, steering, and brake operation.

CAUTION! Never operate without sitting in seat. Keep hands and feet away from moving parts.

Specifications

Engine: 24 HP Briggs & Stratton V-twin, OHV.
Cutting Width: 48 inches.
Transmission: Hydrostatic, infinite forward/reverse.
Cutting Height: 1.5 to 4.5 inches (12 positions).
Fuel Capacity: 3.5 gallons.
Battery: 12V, 280 CCA.
Turning Radius: 18 inches.
Weight: 580 lbs.
Warranty: 3-year limited.

Controls and Settings

Dashboard: Ignition key, PTO switch, throttle, choke, headlight switch, hour meter.

Steering & Speed: Steering wheel, forward/reverse pedals, cruise control lever, parking brake.

Cutting Height: Lever adjusts deck height. Seat: Adjust forward/backward for comfort. Headlights: Toggle switch on dashboard. Hour Meter: Tracks engine hours for maintenance.

Attachments & Accessories

Mulching Kit: Converts deck to mulch grass clippings. Bagging System: 2-bushel capacity grass catcher. Tow Hitch: For pulling cart or spreader.

Install mulching kit: Remove discharge chute, install baffle and mulching blades.
Attach bagger: Connect to rear hitch and deck chute.
Tow hitch: Bolt to frame rear.

Tip: Ensure engine is off and key removed before installing attachments.

Mowing Operation

Supports standard, mulching, and bagging modes.

Start mower: Sit, engage parking brake, turn key.
Engage blades: Move throttle to fast, press PTO switch.
Adjust speed: Use forward pedal; set cruise control if desired.
Cutting patterns: Overlap passes by 2-3 inches for even cut.
Slopes: Mow up and down, not across, on slopes less than 15 degrees.
Shut down: Disengage PTO, engage parking brake, turn key off.

WARNING! Do not mow on steep slopes. Clear area of debris before mowing.

Safety Features

Seat Safety Switch: Engine stops if operator leaves seat with blades engaged. Parking Brake: Must be engaged to start engine. Blade Brake Clutch: Stops blades within seconds of disengagement.

Care & Maintenance

Perform regular maintenance for optimal performance.

Daily: Check tire pressure, inspect for debris.
Every 8 hours: Check oil level.
Every 50 hours: Change oil, replace air filter.
Every 100 hours: Replace spark plug, grease fittings.
Seasonal: Sharpen blades, clean deck, check battery.

CAUTION! Disconnect spark plug before servicing blades. Store with empty fuel tank.

Regulatory Information

EPA Certified: Engine meets emission standards. CARB Compliant: For sale in California. Copyright © 2025 Husqvarna; trademarks of Husqvarna AB. For support, visit www.husqvarna.com or contact 1-800-487-5962.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Engine won't start	Parking brake not engaged, dead battery	Engage parking brake; charge or replace battery; check fuel.
Blades won't engage	PTO switch faulty, seat switch issue	Check PTO wiring; ensure operator is seated.
Poor cutting performance	Dull blades, low engine speed	Sharpen blades; set throttle to fast.
Excessive vibration	Loose blade, debris in deck	Tighten blade bolts; clean deck interior.
Hydrostatic transmission sluggish	Low fluid, air in system	Check fluid level; purge air per manual.

Reset: Disconnect battery for 5 minutes to reset electrical system.

Service: 1-800-487-5962; www.husqvarna.com