Robotic Husqvarna Auto Lawn Mower Manual

The Robotic Husqvarna Auto Lawn Mower is an autonomous lawn care system designed for efficient, quiet, and precise grass cutting. It features smart navigation, boundary wire technology, weather resistance, automatic charging, customizable cutting schedules, theft protection, and compatibility with various lawn sizes and terrains. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Robotic mower unit, Charging Station, Boundary Wire, Pegs, Power Supply, Remote Control (if applicable), Installation Guide.

Installation

Unpack and inspect all components. Choose a suitable location for the charging station.

1. Install Charging Station: Place on flat, stable surface near a power outlet and within the lawn area.
2. Lay Boundary Wire: Peg wire around perimeter of lawn and any obstacles (trees, flower beds).
3. Connect Guide Wire: Run guide wire from station to farthest point to help mower navigate home.
4. Connect Power: Plug charging station into outdoor-rated outlet.
5. Position Mower: Place mower onto charging station contacts for initial charge.

WARNING! Ensure boundary wire is properly secured and not damaged. Keep wire away from metal objects.

First-Time Setup

Power on mower; follow start-up prompts on display or via app.

1. Initial Charge: Allow mower to charge fully (LED indicator turns green).
2. Set Cutting Height: Adjust blade height according to grass length and season.
3. Set Schedule: Program mowing days and times via control panel or app.
4. Test Run: Start manual mow to ensure boundary wire is detected and navigation works.
5. Set PIN: Enable theft protection with a 4-digit code.

CAUTION! Keep children and pets away during initial setup and testing.

Specifications

• Cutting Width: Varies by model (typically 8-10 inches).
• Battery: Lithium-ion, automatic charging.
• Max Lawn Area: Up to 0.5 acres (model dependent).
• Max Slope: Up to 25-35% (check model rating).
• Noise Level: Below 60 dB(A).
• Weather Rating: IPX5 or higher (rain resistant).
• Connectivity: Bluetooth/Wi-Fi (app enabled models).
• Power Supply: 100-240V AC, 50-60Hz.
• Operating Temp: 32°F to 104°F (0°C to 40°C).

Controls and Settings

Access via control panel on mower or mobile app. Buttons: POWER, START/STOP, MENU, UP/DOWN arrows, OK.

Remote/App: START/STOP, Schedule, Cutting Height, PIN Setting, Manual Navigation (if supported).

Settings: Schedule (days, times), Cutting Height (adjustable in increments), Language, PIN Code, Sound (alarm on/off), Weather Timer (delay after rain), Boundary Sensitivity. Advanced: Zone Control (if supported), Slope Handling, App Notifications.

Connecting to App & Network

For models with app connectivity: Download Husqvarna Automower® Connect app.

1. Enable Bluetooth/Wi-Fi on smartphone.
2. Turn on mower and ensure it is in pairing mode (LED blinking).
3. Open app, follow prompts to add new mower.
4. Connect to home Wi-Fi network (if supported) for remote access.

Tip: Ensure mower is within range of Wi-Fi router during setup. Update firmware via app when available.

Operation & Scheduling

Mower operates autonomously based on schedule or manual start.

1. Start Mowing: Press START on mower or via app.
2. Automatic Operation: Mower follows random path within boundary, returns to charge when needed.
3. Schedule: Set daily/weekly schedule (e.g., Mon-Fri, 9 AM-5 PM).
4. Pause/Stop: Press STOP button or pause via app.
5. Manual Override: Use app to steer mower to specific area (if supported).
6. Weather Adaption: Mower may delay start after heavy rain (if enabled).
7. Theft Alarm: If lifted without PIN, alarm sounds and notification sent (app models).

WARNING! Do not lift or touch mower while blades are moving. Keep clear during operation.

Maintenance & Care

Regular maintenance ensures optimal performance and longevity.

• Blades: Replace every 4-6 weeks or when dull (use genuine Husqvarna blades).
• Cleaning: Wipe mower body with damp cloth; clear debris from underside and wheels.
• Charging Contacts: Clean with dry cloth to ensure good connection.
• Wheels & Sensors: Check for wear; clean sensors with soft cloth.
• Boundary Wire: Inspect periodically for breaks or damage.
• Battery: No maintenance required; avoid extreme temperatures.
• Storage: For winter, fully charge, clean, and store in cool, dry place.

CAUTION! Always turn off and remove from charging station before maintenance. Wear gloves when handling blades.

Safety Features

Lift Sensor: Stops blades immediately if mower is lifted. Tilt Sensor: Stops operation if mower tilts excessively. Boundary Wire: Prevents mower from leaving defined area. PIN Protection: Requires code to operate or change settings. Child Lock: Disables buttons on mower (if enabled).

Regulatory Information

FCC Compliance: This device complies with Part 15 of FCC rules. CE Mark: Meets EU safety and environmental standards. Waste Electrical: Dispose of according to local regulations. For support, visit www.husqvarna.com or contact customer service at 1-800-487-5962.

Troubleshooting

Reset: Hold STOP and START for 5 seconds to reboot.

Service: 1-800-487-5962; www.husqvarna.com