yth22v46 husqvarna riding mower owner manual

The Husqvarna YTH22V46 is a 22 HP V-Twin riding lawn mower with a 46-inch cutting deck, hydrostatic transmission, electric PTO engagement, and a heavy-duty steel frame. Designed for residential use on medium to large lawns, it features cruise control, a comfortable high-back seat, a cup holder, and a washout port for deck cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. Controls and Operation 4. Specifications 5. Maintenance Schedule 6. Cutting Deck Adjustment 7. Storage & Winterization 8. Safety Information 9. Warranty Information 10. Troubleshooting

Features at a Glance

Key components: 22 HP Briggs & Stratton V-Twin engine, 46-inch fabricated steel deck, Hydrostatic transmission, Electric PTO clutch, Cruise control, High-back seat, Washout port.

Feature	Description
Engine	22 HP Briggs & Stratton V-Twin, overhead valve (OHV)
Cutting Width	46 inches
Transmission	Hydrostatic, foot-pedal controlled
Deck Material	Fabricated steel with anti-scalp rollers
PTO Engagement	Electric switch
Cutting Height Adjustment	Lever-operated, 1.5 to 4 inches
Seat	High-back, adjustable
Cruise Control	Button on dash for consistent speed
Fuel Capacity	3 gallons
Battery	12V, 280 CCA

Assembly & Setup

Unpack and inspect all parts. Assembly requires basic tools.

Install steering wheel: Align and tighten bolt.
Attach seat: Mount using provided bolts and washers.
Connect battery: Attach red (+) then black (-) cables.
Install deck: Lift mower, align deck with mounting points, secure with pins and belts.
Add engine oil and fuel: Use SAE 30 oil (summer) and unleaded gasoline.

WARNING! Mower is heavy; use assistance. Ensure all bolts are tightened to specification.

Controls and Operation

Familiarize yourself with controls before starting.

Pre-start check: Oil level, fuel, tire pressure, deck clearance.
Starting: Sit on seat, set parking brake, turn key to START.
Driving: Release parking brake, press forward/reverse pedals.
Mowing: Engage PTO switch, adjust speed with pedal.
Stopping: Disengage PTO, set parking brake, turn key OFF.

CAUTION! Always sit in seat when engine is running. Keep hands and feet away from moving parts.

Specifications

Engine: 22 HP Briggs & Stratton V-Twin OHV.
Cutting Deck: 46-inch fabricated steel, 3-blade.
Transmission: Hydrostatic, infinite speeds 0-5.5 mph.
Fuel Type: Unleaded gasoline (87 octane or higher).
Oil Capacity: 2 quarts (SAE 30 for summer, 5W-30 for winter).
Turning Radius: 18 inches.
Weight: 540 lbs.
Warranty: 2-year limited warranty.

Maintenance Schedule

Regular maintenance ensures longevity and performance.

Interval	Task
Before each use	Check tire pressure, oil level, fuel
Every 8 hours	Check deck for debris, inspect blades
Every 50 hours	Change engine oil, check air filter
Every 100 hours	Replace spark plug, grease fittings
Seasonally	Sharpen/replace blades, check battery

Tip: Always disconnect spark plug wire before performing maintenance.

Cutting Deck Adjustment

Proper deck leveling ensures even cut.

Park on level surface, set parking brake.
Measure blade height from ground at all four corners.
Adjust deck height using levers (front and rear).
Re-measure until height is even (within 1/4 inch).

WARNING! Disengage PTO and turn off engine before adjusting deck.

Storage & Winterization

Prepare mower for off-season storage.

Add fuel stabilizer to tank and run engine for 5 minutes.
Change engine oil and filter.
Remove battery, clean terminals, store in cool dry place.
Clean deck thoroughly, sharpen blades.
Store in dry, covered area.

CAUTION! Never store mower with fuel in tank without stabilizer.

Safety Information

Read and follow all safety instructions.

Always wear eye protection and sturdy shoes.
Clear mowing area of debris before operation.
Do not mow on slopes greater than 15 degrees.
Never carry passengers.
Keep children and pets away during operation.

DANGER! Rotating blades can cause severe injury. Always disengage PTO before leaving seat.

Warranty Information

Husqvarna provides a 2-year limited warranty for residential use. Warranty covers defects in materials and workmanship. Not covered: normal wear, improper maintenance, commercial use. For warranty claims, contact authorized Husqvarna dealer with proof of purchase.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Engine won't start	Dead battery, empty fuel, safety switch	Charge battery, add fuel, ensure seat switch is engaged.
Uneven cut	Deck not level, dull blades	Level deck, sharpen or replace blades.
Loss of power	Clogged air filter, old spark plug	Clean/replace air filter, replace spark plug.
Vibration	Loose blade, damaged spindle	Tighten blade bolt, inspect spindle for damage.
Hydrostatic transmission sluggish	Low fluid, air in system	Check fluid level, purge air per manual.

Service: For technical support, contact Husqvarna at 1-800-487-5962 or visit www.husqvarna.com.